Making use of Concrete Piles
Concrete piles are one of the most common types of piling. They are often used on construction jobs taking place on houses as well as other buildings, meaning that they have a wide range of use.
There are quite a few advantages to using concrete piles, which is one of the reasons they are used so often. For instance, they have a long track record of success that makes them ideal for underpinning foundations. They can also be used straight after being installed and, as they are relatively fast to install compared to some other methods, they make a good option when time is of the essence.
Concrete pilings are designed to last as long as the concrete foundation itself, meaning that they have a long service life. To install them, they are pushed under a foundation into the ground, effectively underpinning the foundation to give it extra support. They are installed by digging a hole next to the foundation, which will normally end around two feet below the bottom of the foundation.
Then the cylinder is placed into the hole and kept in place by using a ram. This process is completed until the space has been filled. Once they have been installed and signed off on, any other work that was going on at the property can continue.
What is Sheet Piling?
As you may well know, there are different types of piling available to suit different construction jobs. One of these types is sheet piling, which has a very specific purpose in construction. Read on to find out more.
Typically, sheet piling is used to create a wall surrounding the area of construction. Depending on the needs of the specific job, this wall can either be temporary or permanent. Sheet piles can be found in a range of heights and thicknesses, and the walls are created by interlocking the piles. Sheet piling has two main purposes: to add protection or hide the construction site.
One of the main purposes of sheet piling is to prevent cave-ins. This is something that can be a risk if a construction job is taking place on soft ground. The sheet piling protects the ground and the construction site, allowing work to continue while reducing the risk of problems. It can also prevent flooding on building sites – something that really matters in a country with so much rain.
This means that sheet piling is very versatile and so it is often used in construction jobs. Metal sheet piling is the most popular variety, but it can also be made out of wood or vinyl depending on the needs of the specific job.
The Benefits of Experienced Pile Driving Contractors
If you find that you need to have piling installed on a building project, it is always best to use experienced pile driving contractors such as MK Piling to carry out the work.
One of the reasons it is so important to use professional pile driving contractors is that there is a range of different piling available. From mini piling to CFA piles, there are different options to suit different jobs. For instance, if noise is an issue on one job it might be possible to use a particular type of piling that cuts down on the noise produced during the process. This is something your pile driving contractors will be able to advise you on.
There are also certain standards that need to be met when installing piling foundations. Any work needs to be signed off by a building inspector and it needs to fall into line with the plans specified for the project by an architect. In order to ensure your project is a success, is completed safely and meets all the relevant regulations, it is vital that you use experienced pile driving contractors.
What are Piling Rigs used for?
If you have ever worked on a construction site where foundation piling has been used, you are probably familiar with the site of piling rigs. These have an important part to play in the process of foundation piling, but what exactly is the purpose of piling rigs?
Essentially, the main role of a piling rig is to drill into the earth where the piling in question needs to be applied. Depending on the specific job, the earth could be clay, sandy soil or silt. They are commonly used for jobs involving foundations but can also have uses for diaphragm walls.
There are different types of drill available for use with piling rigs to take account of the fact that different ground conditions will have different requirements. Also, as some building sites are more restricted and harder to access than others, it is possible to get piling rigs of varying sizes so that difficult and hard to reach foundation piling jobs can be taken care of.
If you think you might need a piling rig for a job you are working on, you should always speak to an experienced professional to make sure you get the right equipment for the job in question.
What is Pile Testing?
If you are working on a site where foundation piling has been used, you might well be able to benefit from pile testing. This is something that can also be useful if you are assessing the condition of already existing piles for a particular building.
The aim of pile testing is to work out the condition of the piles in question and it is sometimes also known as a low strain dynamic test. The test involves applying a light impact to a pile, which produces a low strain on the pile – hence the name. This produces a wave that travels down the pile and the wave is monitored for any irregularities: it should travel at constant wave speed, but voids in the concrete or areas where parts of the piling might have worn away will produce what are known as wave reflections.
The pile testing, therefore, highlights whether there are any issues with the foundation piling that need to be sorted out. The process is normally carried out with a hand-held hammer and is most commonly used on piling that has not yet had a structure built on top of it, although pile testing can also determine the length of existing piles.
Why are CFA Piles Useful?
There are many different types of foundation piling available that can be used in a variety of situations. One of these types is CFA piling, but what is it and why is it useful?
CFA piles are a type of piling that is especially good for use on building sites where there is a need to keep noise to a minimum. CFA stands for continuous flight auger and the CFA piles work on a relatively simple premise.
A hollow auger is inserted into the ground once the necessary depth has been worked out, and then concrete is pumped down the hollow stem. At the same time, the hollow auger is withdrawn and, in order to reinforce the piling, a reinforced cage is used.
One of the benefits of CFA piles is that there is no casing involved and so there is minimal disruption associated with using them. They also help to keep vibrations to a minimum and can be used on large projects, making them a good piling solution for a range of situations.
Different projects will have different piling needs, so it’s important you speak to a piling professional to make sure you get the right solution for you.
What is the Purpose of Underpinning Foundations?
Underpinning foundations are used when the depth of a building’s foundations need to be increased. Normally, small sections of the ground below the existing foundations of the building will be excavated before they are underpinned. This will usually be done with concrete but when the quality of the ground is so poor that using concrete isn’t possible, piling can be used instead.
This allows for some flexibility in difficult situations as there are different types of piling available that can be used for underpinning. Underpinning foundations can be used for a few different reasons. For instance, if another storey is being added on to the building, the existing foundations might not be able to take the increased load and so underpinning will be required. Also, if a house has suffered from subsidence and the current foundations have been damaged or have moved, underpinning foundations could be used to help rectify the problem.
It’s important that underpinning foundations are put into place in the correct manner, or else they could cause damage to the building. This is why it is so important to always use experienced, professional services when making any alterations to the foundations of a building.
How Pile Driving Contractors Could Help You
If you are dealing with a construction project, you might well be able to make use of the services of professional pile driving contractors. Pile driving can often be a very specialised area of work so it is definitely worth making sure the job is carried out by people who know exactly what they are doing.
For instance, pile driving contractors will be able to look at the job in question and tell you what type of piling would work best in the situation. This can include things such as the material the pile should be made out of for best results, where the piles need to go, how many of them there should be and the specific type that needs to be used.
This is information that it might not be possible to get without pile driving contractors, but it could make all the difference in turning your building project into a success. Whether you are working on a small building project such as a house extension, or something much larger, the services of pile driving contractors will definitely be able to help you and make sure you get exactly the right piling solution for your needs.
What is the Purpose of Foundation Piling?
Everyone knows that before you can construct a building on a site, the foundations have to be laid first. This, however, requires the ground in question to be in a certain condition and ready to take the load of the building on top of it. Sometimes this isn’t the case and so foundation piling provides a solution that readies the ground for building.
Foundation piling is used to provide a firmer base by walling in layers of soil. Commonly this is done by driving down piles into the ground where the building is due to be constructed. The number and type of foundation piling used for each job will differ, so it is definitely worth talking to experienced piling professionals if you ever find yourself in need of piling.
Some foundation piling is made out of wood, but more commonly it tends to be made out of either steel or concrete. There are also different types of foundation piling available for projects where there isn’t much space or the area is hard to access, such as mini piling, which is commonly used for house extensions and smaller property developments.
Different Types of Mini Piling
Filed under: Bored Cased Piles, Drop Weight Driven Piles, Grundomat Driven Piles, Mini Piling
Mini piling is a piling solution that is commonly used where access on a building site is tight but piling is still needed in order to prepare the ground before anything can be built on top of it. There are several different types of mini piling available, each of which is slightly different and so can be used for slightly different purposes.
Drop Weight Mini Piling
This is a type of mini piling that is especially useful on projects where there is only limited headroom and so not a lot of space to work in. For instance, housing developments can often make use of drop weight mini piling.
Bored Case Mini Piling
By contrast, one of the main benefits of this type of mini piling is that it can help to keep vibrations to a minimum, which is more important on some sites than others. If there is sensitive equipment or wildlife nearby that shouldn’t be disturbed, for example, bored case mini piling could be an option.
Grundomat Driven Mini Piling
This is a type of mini piling that is popularly used when access is difficult but there is a need to keep noise and disruption to a minimum, such as for house extensions.
As all building projects are slightly different, the type of mini piling required will also differ; it’s always worth getting professional advice to make sure you get the type of mini piling that’s right for you.